Stefano Benuzzi speaker at ECNDT 2026
As part of ENCDT 2026—European Conference on Non-Destructive Testing— Stefano Benuzzi, NDT Manager at Sideius, delivered a presentation on behalf of the ITANDTB RT No Film 3D Commission titled “Computed Tomographic Inspection in the Aerospace Industry: Guidelines for Standardizing the Inspection Process and a Study of Image Quality Parameters Based on Italian Experience,” written in […]
LCF and HCF fatigue testing of metallic materials
White paper illustrating the difference between HCF (High Cycle Fatigue) and LCF (Low Cycle Fatigue) fatigue tests
Case study | Thermal Barrier Coatings
Case study of mechanical characterization on thermospray coating of an aircraft turbine blade
Case study | Wear and tear of a blade
Comparative case study between a new and a worn razor blade
Testing on fasteners
TEC Eurolab’s Fasteners testing service: customer benefits and key developments in the fastener industry
FAI: First Article Inspection
What is First Article Inspection FAI, or First Article Inspection, is a detailed inspection process that is performed on the first item produced in a new production run or after significant changes to a manufacturing process. This test is critical to ensure that all technical and quality design requirements are met before mass production begins.TEC […]
White Paper | Dynamic Mechanical Analysis
Discover Dynamic Mechanical Analysis (DMA), a technique used in the field of thermal and materials engineering.