Accreditation and approvals

Accreditation and customer approvals as a laboratory and certification body

Sideius under the TEC Eurolab brand is a third-party materials testing laboratory: independent, impartial and accredited UNI CEI EN ISO/IEC 17025:2018 and NADCAP.

A center of excellence for laboratory testing and non-destructive testing, it is able to support every manufacturing company in researching and achieving the highest quality and safety standards for its products and processes.

Accreditation and approvals for TEC Eurolab laboratories and Valor, Certification Body of Sideius

Laboratory Accreditation

UNI CEI EN ISO/IEC 17025:2018 - ACCREDIA DL

Testing Laboratories Department. Accreditation for performing laboratory tests (downloadable list of accredited tests)

EN 9100:2018

Application of management system in accordance with EN 9100:2018 for providing services as a testing laboratory for the aviation and aerospace industry.

UNI EN ISO 9001:2015

Application of management system in accordance with UNI EN ISO 9001:2015 for service delivery.

NADCAP - NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM

Accreditation issued in accordance with SAE Aerospace Standard AS7003 for performing materials testing.

NADCAP - NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM - NON-DESTRUCTIVE TESTING

Accreditation issued for performing non-destructive testing.

NADCAP - NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM - AEROSPACE QUALITY SYSTEMS

Accreditation issued for Aerospace quality systems.

RECOGNIZED THIRD-PARTY ORGANIZATION

Recognition as a Third Party Entity for approval of personnel performing permanent joints for pressure equipment of categories II, III, IV (point 3.1.2 Annex I); approval of personnel performing non-destructive testing according to Annex I point 3.1.3 to Directive 2014/68/EU.

MIUR RECOGNITION

Recognized by MIUR (Ministry of University Education and Research): this recognition allows Sideius S.r.l.’s clients to access funding for Industrial Research Support under Decree Law 297/99.

INAIL RECOGNITION - METALLOGRAPHIC REPLICAS SECTOR

TEC Eurolab has been included in the list of Laboratories recognized by INAIL (National Institute for Insurance against Accidents at Work), Research, Certification and Verification Sector for the sampling and evaluation of replicas on components exercised under viscous creep.

Certification Body Accreditations

UNI CEI EN ISO/IEC 17024:2012 - ACCREDIA - DCI (PRS)

Accreditation Certificate for the Certification of Non-Destructive Testing Personnel and Welding Personnel.

UNI CEI EN ISO/IEC 17065:2012 - ACCREDIA - DCI (PRD)

Accreditation Certificate for Product/Service Certification: PED directive, pressure equipment, welding processes, brazing processes.

UNI CEI EN ISO/IEC 17021-1:2015 - ACCREDIA - DCI (MS)

Accreditation Certificate for the Certification of Management Systems: quality management systems UNI EN ISO 9001:2015

F-GAS AUTHORIZATION

Designation as Certification Body of natural persons referred to in Regulations (EC) No. 304/2008 and No. 306/2008 and Implementing Regulations (EU) 2015/2067 and 2015/2066 and as Certification Body of enterprises referred to in Regulation (EC) No. 304/2008 and Implementing Regulation (EU) 2015/2067, pursuant to Presidential Decree 146/2018, Article 5, Paragraph 1.

Qualifications obtained from customers

GE AVIATION

GT 193 Certification – Approval as a certified laboratory for performing chemical, physical and mechanical analysis of metallic materials and computed tomography.

LEONARDO SPA HELICOPTER DIVISION

Approval as a qualified supplier for materials laboratory analysis, testing and verification of metallic and composite materials.

LEONARDO SPA AIRCRAFT DIVISION

Approval as a qualified laboratory for chemical, chemical/physical, and mechanical analyses for acceptance tests on metallic, composite (including cured) and elastomeric blanks and for process control tests. Salt spray corrosion testing.

LEONARDO SPA ELECTRONIC DIVISION

Approval as a qualified laboratory for tomography, radiographic inspection and liquid penetrant inspection.

AVIO SPA

Approval as a qualified supplier for non-destructive testing in PT and RT Film methods.

THE BOEING COMPANY

Approval as a qualified laboratory for performing chemical, metallographic, mechanical tests on fasteners, carbon fiber, resins. Salt spray corrosion testing. Control of process solutions.

AIRBUS COMMERCIAL AIRCRAFT

Qualification as an official Airbus Supply Chain supplier for the Material Testing division.

NDE QUALIFICATION | NUOVO PIGNONE SRL (GE GROUP - OIL & GAS)

NDE Qualification-Approval as a qualified laboratory and supplier to perform non-destructive testing in Liquid Penetrant (PT), Magnetic (MT), Ultrasonic (UT) inspections.

Need a specific test or to solve a technical problem?

FILL OUT THE FORM. We will help you find the best solution for your needs