NEW DIAGNOSTIC METHODS FOR THE ANALYSIS OF PRODUCTS CREATED BY ADDITIVE MANUFACTURING, Insights
https://www.tec-eurolab.com/eu-en/new-diagnostic-methods-for-the-analysis-of-products-created-by-additive-manufacturing.aspx

As regards the material, an isotropic model was used with characteristics typical of aluminum and fatigue life of 2,000,000 cycles with an amplitude of 100 MPa. ... Fig. 13 - Metallographic analysis near the defect.

Painted products and coatings, laboratory analysis for materials, analysis and laboratory tests, solutions quality materials control, troubleshooting
https://www.tec-eurolab.com/eu-en/painted-products-and-coatings.aspx

Prevent defects in post-production Ask for a quote CHEMICAL ANALYSIS For chemical analysis of the surface protection layers, depending on the type of coating, several analytical techniques may be used: INORGANIC OR METALLIC COATINGS: SEM/EDS ANALYSIS ORGANIC COATINGS  (ES: PAINT): FT-IR  ANALYSIS [...]

Metallics testing services, laboratory analysis for materials, analysis and laboratory tests, solutions quality materials control, troubleshooting
https://www.tec-eurolab.com/eu-en/metallics-testing-services.aspx

Topics > Metallics testing services Metallics testing services COMPLETE SET OF TESTS ON FASTENERS VERIFICATION OF PARAMETERS AND STANDARDS COMPLIANCE SURVEY OF ISSUES AND/OR STUDY FOR THE IMPROVEMENT OF PRODUCTS CHEMICAL ANALYSIS CHEMICAL ANALYSIS (ICP-EOS) GAS CONTENT (H,O,N) POSITIVE MATERIAL [...]

Metallographic analysis of alloys for additive manufacturing and Additive Manufacturing app, Insights
https://www.tec-eurolab.com/eu-en/metallographic-analysis-of-alloys-for-additive-manufacturing-and-am-app.aspx

Insights > Metallographic analysis of alloys for additive manufacturing and Additive Manufacturing app Metallographic analysis of alloys for additive manufacturing and Additive Manufacturing app TEC Eurolab, thanks to his long experience in metallographic analysis, has extended its range of expertise in the world of alloys used for the [...]

Testing for Additive Manufacturing, Additive Manufacturing
https://www.tec-eurolab.com/eu-en/testing-for-additive-manufacturing.aspx

Topics > Additive Manufacturing > Testing for Additive Manufacturing Testing for Additive Manufacturing TESTING for Additive Manufacturing CHEMICAL AND PHISICAL TESTS Specifical chemical analysis (ICP+Combustion+NOH+CS) | X-Ray Fluorescent (XRF) | Granulometric distributions (laser+sieves) ASTM B822 | Flow rate ASTM B213 | Tap density/Apparent density ASTM B212 | Humidity [...]

Analysis of phases
https://www.tec-eurolab.com/eu-en/analysis-of-phases-v1.aspx

Glossary of terms > Analysis of phases Analysis of phases Metallic materials have a wide range of mechanical properties and this determines their particular versatility. ... Many phase transformations are important in the preparation of materials; usually these involve changes in the microstructure.

Metallographic test non ferrous metal materials
https://www.tec-eurolab.com/eu-en/metallographic-test-non-ferrous-metal-materials.aspx

Glossary of terms > Metallographic test non ferrous metal materials Metallographic test non ferrous metal materials METALLOGRAPHIC TESTS OF FERROUS AND NON FERROUS MATERIALS Purpose A  microstructural analysis is performed in order to evaluate the microstructure in a [...]

Metallographic test ferrous metal materials
https://www.tec-eurolab.com/eu-en/metallographic-test-ferrous-metal-materials.aspx

Glossary of terms > Metallographic test ferrous metal materials Metallographic test ferrous metal materials METALLOGRAPHIC TESTS OF FERROUS AND NON FERROUS MATERIALS Purpose A  microstructural analysis is performed in order to evaluate the microstructure in a metal [...]

Optic emission spectrometry (EOS)
https://www.tec-eurolab.com/eu-en/optic-emission-spectrometry-eos.aspx

Description The technique of the emission spectrometry analysis uses a high energy discharge created in the space filled in of gas between an electrode and a sample of the material to be tested. ... The chemical composition of a metal alloy is important to classify the material.

Decarburization
https://www.tec-eurolab.com/eu-en/decarburization-V1.aspx

Glossary of terms > Decarburization Decarburization METALLOGRAPHIC TESTS OF FERROUS AND NON FERROUS MATERIALS Purpose A  microstructural analysis is performed in order to evaluate the microstructure in a metal alloy. ... The microstructure of a material allows to evaluate the state of supply and the possible presence of [...]

Related searches: metal materials analysis

SUBSCRIBE TO THE NEWSLETTER
Sigla.com - Internet Partner
Contact us to learn more or request your tomographic analysis click here X