Material testing

The material analysis center of TEC Eurolab is an accredited laboratory UNI CEI EN ISO/IEC 17025:2005 and NADCAP for tests on materials. Accurate analysis are performed on many types of materials, from metals to polymers, offering the customer the technical support necessary for the correct interpretation of data, in order to identify the most appropriate operational solutions.

The center consists of a:

metallurgy department
chemical department
mechanical testing laboratory
internal workshop able to support the different departments in the realization of specimens and equipment necessary to carry out the tests.


Metals and metallic powders
  • Chemical analysis of metallic alloys (ICO-OES, XRF, SPARK-OES)
  • Gas analysis: combustion and fusion method for C-S-H-O-N
  • Chemical process solution control: ion chromatography
  • Cleanliness test
  • Debris analysis by SEM EDS, Smart PI application
  • Flow rate
  • Tap-Apparent Density
  • Particle size distribution: Light Scattering / Sieve Method
  • Powder Morphology by SEM analysis
  • Thermal conductivity and thermal diffusivity
  • Dilatometry: Coefficient of linear expansion
  • Infrared spectroscopy FTIR
  • Thermal analysis: DSC, TGA
  • High Pressure Liquid Chromatography HPLC
  • Resin/Fiber/Void/Volatile content of composite materials
  • Resin Flow/Gel Time/Fiber Areal Weigh
  • Thermal conductivity/Thermal diffusivity
  • Dilatometry: Coefficient of linear expansion


  • Failure analysis
  • Scanning electron microscopy, EDS detector
  • Macrographic analysis
  • Micrographic analysis: core and near surface
  • Grain size, inclusion content, surface contamination
  • Density of AM specimens by micrographic examination
  • Hardness: brinell, vickers, rockwell


  • Neutral Salt Spray, Acetic acid and Copper
  • Artificial accelerated Weathering
  • UV condenser
  • Humidity aging
  • Thermal shock test
  • Thermal cycles exposure


  • Full range of testing in accordance with ISO/ASTM standards on semiproducts, components and AM on metallic alloys:
  • Static tensile testing (up to 600kN) at room temperature
  • Static hot tensile testing up to 100kN up to 1000°C
  • Torque testing
  • Stress Rupture and Creep testing up to 50kN up to 1100°C
  • Vibrophores for HCF up to 1100°C
  • Servohydraulic system for LCF/HCF up to 1100°C
  • KIC and da/dN testing for fracture mechanics
  • Internal machining capabilities with EDM wire and finishing tecnologies
  • Full range of testing in acccordance with ISO/ASTM/SACMA standards on composite laminates/sandwiches at low and high temperature:
  • Static testing (Tensile, Bending, Shear, Compression, Charpy/IZOD Impact toughness)
  • Dynamic/fatigue and custom testing in dry and wet condition
  • DMA analysis - Internet Partner
Contact us to learn more or request your tomographic analysis click here X