Choose your country
Mission & vision
TEC Eurolab Board
tec eurolab & kaizen
Automotive & Racing
Aerospace & Defense
Paints & coatings
News and Events
News and events
TEC Eurolab Newsletter
Aerospace & Defense
Automotive & Racing
Oil & GAS
Materials testing centre
Non destructive testing
Tec eurolab around the world
CUSTOM FATIGUE TESTS
How to measure material's water content
TEC Eurolab chooses Cohesity DataPlatform for data security
Structural Simulation of Components with Manufacturing Process induced Defects
TEC EUROLAB PRESENTS THE NEWLY AVAILABLE DIONDO D7 6 MEV LINAC COMPUTED TOMOGRAPHY SYSTEM
Fast and Accurate Simulation of Manufactured Parts with Defects
Characterization of composite materials: TEC Eurolab solutions and process optimization
Accurate and efficient simulation of real pore geometries directly on CT images
Non destructive testing for Automotive
A Study on the Use of XCT and FEA to Predict the Elastic Behavior of Additively Manufactured Parts of Cylindrical Geometry
“Frattura a Scaglie” in Parmigiano Reggiano Cheese with Industrial Tomographic system
NEW DIAGNOSTIC METHODS FOR THE ANALYSIS OF PRODUCTS CREATED BY ADDITIVE MANUFACTURING
Dynamic Testing in the Automotive Industry: Connection Rod Fatigue Test
Phased Array UT: Test on Carbon Fiber Piece
ADHESIVE BONDING OF CARBON FIBERS
Phased Array UT: Test on Carbon Fiber Pipe
Magnetic particles test (MT) on mechanical product
Eddy current test (ET) on full tube product
Watch the video test
Nickel free - fit to skin contact
Damage of rubber water bag
Failure on a polyethylene tank
The tank to be tested presented a superficial ductile fracture, with different damaged parts around it. SEM view. Thickness determination. Differential scanning calorimetry DSC. Degree of curing determination.
Tomographic analysis of Additive Manufacturing components
CT X-Ray 3D Scan of Electronic part
CT X-Ray 3D Scan of USB Flash Drive Pen : Video
Germany: qualification of welding operators
TEC Eurolab IWI in Germany to qualify a group of welding operators.
Welding and NdT in Norway
TEC Eurolab IWT and NdT technicians in Norway for welding and NdT activities.
Non destructive testing in China
TEC Eurolab in China to support a client, for some non destructive testing on a supply pipes. Goals of verifies, performed by TEC Eurolab NdT technician LEVEL II according to ISO 9712 and SNT-TC-1-A for UT Method (Ultrasonic Test), was identify volumetric and surface defects on pipes.
Spain - welding and welders inspections
TEC Eurolab this time attend in Spain to support his client for some inspections on welders. TEC Eurolab International Welding Inspector has been called for verify the activity of some welding operators of the client. The supervision of the activity according to welding WPS...
STRADIVARIUS AT TEC EUROLAB
MUTINA SPLENDIDISSIMA EXHIBITION
Comparison between additive manufacturing and wrought part realized with maraging steel.
Piston rod: measurements, wall thickness and defect investigation
Electronic board: ct scan and wall thickness
Ski boot: ct scan and wall thickness
Certification of Vacuum Brazing Process
Certification of Brazing induction Process
Welding inspection on construction site
Dimensional test of diaphrams of gas pipes
Dimensional test on automotive engine components (cylinder heads, basements, valves, piston rods ect.)
Selction Analysis PMI
Termographic oven Investigation
Metallographic Replica on site tests
Check for presence
RX Test on a Welded joint
Assistance to a Drilling Company in China – Hong Kong. Weldability of steel weldox700E.
Welding process continuous copper-copper
X-Ray of a medical device: Video
NSI X-view X5000: Video
X-ray of a die casting: Video
X-ray of a gear assembly: Video
X-Ray of an automotive piston: Video
Coal X-ray: Video
X-ray of a granite sample: Video
X-ray of a 50cal bullet: Video
X.ray of a chip BGA: Video
X-ray of a connector: Video
X-ray of a radio: Video
x-ray of a Honeycomb structure: Video
X-ray of the active principle of a pill: Video
Food contact suitability - component in painted cast iron
Food contact suitability - component for industrial plants
Food contact suitability - Knife with inox steel blade
Food contact suitability - knife with ceramical blade
Food contact suitability - Kitchen Utensils inox steel
Cracks by zinc-coating
The sample under investigation consists of a mechanical component in galvanized steel broke into operation.
Breakage of a wheel shaft
Stress Corrosion Cracking (SCC) type corrosion of flexible inox pipe
Pitting type corrosion of inox pipe - Corrosion analysis
One of the phenomenon that brings a component not to be useful for its purpose, even if it's not broken, is wear, that means "lost" of material consequent to the continuous sliding between two surfaces. Wear has consequences both on industrial field, and on personal usage of consumers, such as for example razor blades.
Detachment of a polyurethane ring glued on a metallic support
The ring to be tested consisted of two attached parts: a metallic ring and a polymeric ring. Our laboratory performed some exhamination of the adhesive layer on each the two attached surfaces, after being detached.
Failure on a fiberglass pipe
The goal of the investigation is to characterize the material and understand the causes of the damage occured on a fiberglass pipe.
Thermographic analysis of serpentine in Germany
This time, our technicians have been called by one of our customers in Germany for analysis that were intended to ensure...
TEC Eurolab continues to bring its services throughout Europe. Its qualified technicians, this time have been called by a major customer over the Alps, specifically in Toulouse (France) to execute non-destructive testing at the production site of the customer...
Non Destructive Testing in Spain
TEC Eurolab this time landing in Spain for about a 15,000 tons "problem" .
Our two welding inspectors (IWI - International Welding Inspector), levels 2 and 3 in non-destructive testing according to UNI EN ISO 9712, they went by our client to carry out a Expediting (inspection at 360 °) on welded foundation piles....
TEC Eurolab Know How in Argentina
TEC Eurolab in Argentina to present an integrated system to integrity verify dedicated...
Hong Kong - Chinese Welding
TEC Eurolab once again heading to China (Hong Kong) to assist this time a drilling company which found weldability problems of used steel (Weldox700E)
During maintenance of the excavation device...
Beyond Europe to Welding
Our technicians called once again to solve problems beyond Europe. This time they landed in the U.S. and then Japan to achieve.
Skills that need, taken wherever they "are".
TEC Eurolab, with a policy of continuous investment on its core competencies, participates in national and international training courses in order to develop...
Our team of experts is ready to help you test and improve materials, products and processes.
Send us your request
TEC Eurolab Srl
- Viale Europa, 40 - 41011 Campogalliano (Mo) - Italy
+39 059 527775 -
+39 059 527773 -
Copyright © 2005-2021 TEC Eurolab Srl
[ Privacy information ]
[ Legal ]
[ Terms of sale ]
[ Change cookie consent ]
to learn more or request your tomographic analysis