Dimensional testing

Choose your language:   ITALIANO | ENGLISH


Searches
top searches
INDUSTRIES:
|
|
|
|
|
|
|
|
|
|
|
|
|

 Acceptance testing 
Materials Pit Stop Service 

A A A


DIMENSIONAL TESTING

The dimensional testing offered by TEC Eurolab Srl, through measuring dimensions, shapes and positions on prismatic particulars, allows to verify the correspondence between the physical producted object (prototype or batch of products) and the drawing made in the design phase. The accuracy provided by the instruments used, together with the experience of the technicians performing the measurements, make this service a valuable tool for the verification of dimensional compliance of products.

The information obtained through the dimensional testing, said in plain words, allow to verify "in the reality" (ie on the particular in three dimensions) what are the measures specified in the technical drawing and thus to ensure its dimensional conformity.
The dimensional measurements can be made through specific equipment and methods, depending on the data to be obtained and the objectives of the client.

In dimensional testing centre of TEC Eurolab Srl, measurements are performed through the use of the most suitable equipment:
Coordinate Measuring Machine (CMM), Portable laser scanner 3D, Optical machine 3D, Roundness-meter, Roughness-meter / Profilometer, instruments for controls on test bench.

Dimensional testing techniques are used virtually without limits in every industrial sector: metal mechanical companies, including foundries and printing industries, plastics and ceramic industries. These techniques are used whenever it is necessary to verify the compliance of a dimension,  shape, position on any particular. TEC Eurolab Srl offers the security of an accurate and professional measurement.
To ensure the quality of objects increasingly conforming to Designs and to constructions of models on CAD systems, we have to ensure the correct evaluation of standard geometries as well as the determination of free-form surfaces.
For this purpose, TEC Eurolab Srl is able to offer the service in order to determine the deviation between the actual geometry or free-form surfaces of the object and the theorical "mathematic". With these innovative systems, TEC Eurolab Srl has also entered the reality of the Reverse Engineering of the product creation, in fact, with the digitalization of free-form surfaces it is possible to type models to enable CAD systems present in the companies for the further elaboration of the surfaces definition.

For any inquiry, please do not hesitate to contact our laboratories.







Internet partner: Sigla.com
[www.sigla.com]