Welding is a special process allowing to permanently join solid parts, obtaining material continuity.
Brazing is a special process allowing to obtain joints just melting the brazing alloy, maintaining the wholeness of joint edges.
TEC Eurolab: Qualified technical support
The designer of the welded joint should always pay close attention not only to structural calculations but also to the materials used. It would seem a trivial recommendation, however, the daily experience carried out in TEC Eurolab often leads us to analyze cases of defects and failure of welded joints in which the main cause of the defect itself was the uncorrect choice of materials in relation to the process applied.
The assurance of quality standards required by the Quality System certification standards is an obligation for each company performing welding or brazing machining. In this industry, too, TEC Eurolab s.r.l. supplies a qualified and timely service to all companies thanks to certified professionals: International Welding Engineer and International Welding Technologist.
Our centre is particularly equipped to draw documents, carry out lab tests and give technical advice to the mechanical companies which have to manage special processes such as welding and brazing in the framework of ISO 9000 certification. Moreover, in case of failure of welded elements during use, TEC Eurolab S.r.l. is able to trace back the failure causes and find the most suitable technical solution avoiding the repeating of the fault, as far as possible.